lecture-adc.py
Two 12-bit analog readings in one script: an external voltage on GP26 (ADC0) and the chip's built-in thermal sensor converted to degrees using datasheet parameters. Great for watching CPU load.
Hardware
A Raspberry Pi Pico 2 (RP2350 dual Cortex-M33 @ 150 MHz) with MicroPython installed, powered over USB. For the external channel: 10 kΩ potentiometer (wiper to GP26, ends to 3V3 and GND). The internal sensor needs nothing.
Wiring
Potentiometer wiper to GP26, one end to 3V3, the other to GND. Never exceed 3.3 V on an ADC pin.
How it works
ADC(Pin) or ADC(4) opens a channel; read_u16() returns 0-65535 scaled to the 3.3 V reference. The internal temperature uses the typical calibration 0.706 V at 27 °C, slope -1.721 mV/K.
Running it
Install the « Pico 2 » MicroPython build (hold BOOTSEL, plug USB, drop the .uf2), then copy the script via Thonny. Auto-starts when named main.py.
Variants
Average several readings to cut noise, or use adc.init(sample_bits=8) to trade precision for speed.
lecture-adc.py
# ADC 12 bits : entree externe GP26 (ADC0) + capteur thermique interne.
from machine import ADC, Pin
import time
# CAN 0-3 = GP26..GP29 ; le canal 4 est le capteur de temperature.
adc_externe = ADC(Pin(26))
adc_temp = ADC(4)
REFERENCE = 3.3 # tension de reference de l'ADC
def tension(adc):
# read_u16 renvoie 0..65535 ; l'ADC interne a 12 bits.
return adc.read_u16() * REFERENCE / 65535.0
def temperature_interne():
# Doc technique RP2040/RP2350 : 0,706 V a 27 degC, pente -1,721 mV/K.
v = tension(adc_temp)
return 27.0 - (v - 0.706) / 0.001721
print("Mesures toutes les secondes (Ctrl-C pour arreter)")
while True:
u = tension(adc_externe)
t = temperature_interne()
print("GP26 = %.2f V | temperature interne = %.1f C" % (u, t))
time.sleep(1)